SMC EliteConnect Wireless Bridge Guia do Utilizador descarregar pdf (Página 211)

RADIUS Client

7-63

radius-server port-accounting

This command sets the RADIUS Accounting server network port.

Syntax

radius-server [secondary] port-accounting <port_number>

• secondary - Secondary server. If secondary is not specified, then the

access point assumes you are configuring the primary RADIUS server.

• port_number - RADIUS Accounting server UDP port used for accounting

messages.

(Range: 0 or 1024-65535)

Default Setting

0 (disabled)

Command Mode

Global Configuration

Command Usage

• When the RADIUS Accounting server UDP port is specified, a RADIUS

accounting session is automatically started for each user that is

successfully authenticated to the access point.

Example

radius-server timeout-interim

This command sets the interval between transmitting accounting updates to the

RADIUS server.

Syntax

radius-server [secondary] timeout-interim <number_of_seconds>

• secondary - Secondary server.

• number_of_seconds - Number of seconds the access point waits between

transmitting accounting updates. (Range: 60-86400)

Default Setting

3600

Command Mode

Global Configuration

Command Usage

• The access point sends periodic accounting updates after every interim

period until the user logs off and a “stop” message is sent.

SMC AP(config)#radius-server port-accounting 1813

SMC AP(config)#

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 317 318

Sem comentários

SMC EliteConnect Wireless Bridge Guia do Utilizador Página 211