SMC EliteConnect Wireless Bridge Guia do Utilizador descarregar pdf (Página 248)

Command Line Interface

7-100

channel

This command configures the radio channel through which the access point

communicates with wireless clients.

Syntax

channel <channel | auto>

• channel - Manually sets the radio channel used for communications with

wireless clients. (Range for 802.11a: 36, 40, 44, 48, 52, 56, 60, 64, 149,

153, 157, 161, 165 for normal mode, and 42, 50, 58, 152, 160 for turbo

mode; Range for 802.11b/g: 1 to 14)

• auto - Automatically selects an unoccupied channel (if available).

Otherwise, the lowest channel is selected.

Default Setting

Automatic channel selection

Command Mode

Interface Configuration (Wireless)

Command Usage

• The available channel settings are limited by local regulations, which

determine the number of channels that are available.

• When multiple access points are deployed in the same area, be sure to

choose a channel separated by at least two channels for 802.11a to avoid

having the channels interfere with each other, and at least five channels for

802.11b/g. You can deploy up to four access points in the same area for

802.11a (e.g., channels 36, 56, 149, 165) and three access points for

802.11b/g (e.g., channels 1, 6, 11).

• For most wireless adapters, the channel for wireless clients is automatically

set to the same as that used by the access point to which it is linked.

Example

transmit-power

This command adjusts the power of the radio signals transmitted from the access

point.

Syntax

transmit-power <signal-strength>

signal-strength - Signal strength transmitted from the access point.

(Options: full, half, quarter, eighth, min)

SMC AP(if-wireless g)#channel 1

SMC AP(if-wireless g)#

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 317 318

Sem comentários

SMC EliteConnect Wireless Bridge Guia do Utilizador Página 248